Maker reference only. Verify brand instructions, seller details, dimensions, and safety guidance for your own setup.
Build this as a round layered eyeball plaque on one flat pink base, not a full sphere. The product shot shows a slightly puffed front with a white sclera, stepped yellow iris, and dark blue pixel pupil, while the collar photo confirms it still works as a light brooch. Cut the stacked rings first, center the pupil before you ease the rim, and leave the back flat for the pin finding.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Roll one pink base disc first and keep it slightly thicker than the upper layers so the brooch has enough body without turning into a sphere.
Cut the white sclera, the stepped yellow iris, and the dark blue plus pupil separately, then stack them from largest to smallest while the clay is still cool and crisp.
Press the layers down just enough to bond them, then ease only the outer pink rim with your fingertip or a soft tool if you want the rounded front from the product image.
Bake the brooch flat on a tile, let it cool fully, then attach the pin finding to the back so the rounded face does not get distorted during curing.
Add gloss only after the shape is finished if you want the same shiny wet look as the close-up image.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
This core kit covers the repeatable clay, tools, and hardware for this build family.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Covers the pink outer ring and helps you keep the brooch close to the product palette.
Needed for the sclera so the yellow iris reads clearly.
Matches the stepped iris field.
Useful for the plus-shaped pupil block at the center.
Helps you roll the base and all the concentric layers to the same thickness.
Keeps the plaque even so the brooch stays round instead of lumpy.
Useful for trimming the stepped iris and pupil shapes cleanly.
Keeps the brooch back flat while the rounded front cures.
Gives the plaque a simple post-bake attachment path that matches the collar-pin read in the lifestyle image.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Graphic lips, eyes, mushrooms, and badge-like brooches are often easier to build as flat or gently domed pixel slabs. This guide covers crisp staircase edges, stacked layers, and ways to keep left and right pieces matched.
A brooch front can look strong and still hang poorly if the back is crooked, under-sized, or glued to a curved surface. This guide explains flat backs, balance, and more reliable attachment options to test for polymer clay pins.
Conditioning is not just softening clay. It is how you get cleaner slabs, steadier cane reduction, and sharper cut edges before the piece ever reaches the oven.
Explore adjacent builds with similar form, finish, or construction ideas.
Start with the cutter setup, thickness control, and clay that behave predictably. Clean edges come from the tooling and clay behavior, not just the shape.
See all guides
Start with a sharp stainless cutter set in circles, arches, or ovals. Clean release and repeatable slab thickness matter more than having dozens of shapes on day one.
A practical first order can stay focused: clay, a tile, an acrylic roller, a tissue blade, and an oven thermometer.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.
