Maker reference only. Verify brand instructions, seller details, dimensions, and safety guidance for your own setup.
Build this as one rounded flower plaque with a stepped center, not as separate puffy petals. The product and collar photos show a single five-lobed pink flower with a darker edge band and a yellow pixel cross at the center. Cut the flower silhouette first, keep the back flat for the pin, then stack the center shapes after the petal outline already feels balanced.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Roll enough pale pink clay for the flower body and cut the full five-petal outline before you start the center details.
Add a darker pink edge band or perimeter layer to sharpen the petal shape, then press it down without flattening the rounded lobes.
Cut the yellow stepped center and the thin black outline as separate pieces so the middle stays crisp and centered.
Bake the plaque flat on a tile, let it cool fully, then attach the brooch pad on the back instead of building the hardware into the soft rounded front.
Gloss only after cure if you want the same candy-surface shine from the product image.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
This core kit covers the repeatable clay, tools, and hardware for this build family.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Useful for the darker edge band around the flower and for mixing the deeper pink tone.
Helps you mix the lighter petal face so it stays softer than the edge band.
Matches the stepped center cross in the middle of the flower.
Useful for the thin dark outline around the center shape.
Keeps the petal plaque and center stack evenly rolled before assembly.
Helps the flower stay thick enough to look rounded without going uneven.
Useful for refining the five-petal outline and trimming the stepped center cleanly.
Keeps the back flat while the rounded flower front cures.
Gives the plaque a simple post-bake attachment path that matches the collar-pin read in the lifestyle image.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Graphic lips, eyes, mushrooms, and badge-like brooches are often easier to build as flat or gently domed pixel slabs. This guide covers crisp staircase edges, stacked layers, and ways to keep left and right pieces matched.
A brooch front can look strong and still hang poorly if the back is crooked, under-sized, or glued to a curved surface. This guide explains flat backs, balance, and more reliable attachment options to test for polymer clay pins.
Explore adjacent builds with similar form, finish, or construction ideas.
Start with the cutter setup, thickness control, and clay that behave predictably. Clean edges come from the tooling and clay behavior, not just the shape.
See all guides
Start with a sharp stainless cutter set in circles, arches, or ovals. Clean release and repeatable slab thickness matter more than having dozens of shapes on day one.
A practical first order can stay focused: clay, a tile, an acrylic roller, a tissue blade, and an oven thermometer.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.
