Maker reference only. Verify brand instructions, seller details, dimensions, and safety guidance for your own setup.
Build this as a flat oval eye plaque with stepped concentric bands, not as the rounded dome used on the other eyeball brooch. The product and lifestyle images both show a broad yellow, pink, white, and blue eye that sits flat on fabric. Cut the full eye shape first, keep the inner rings centered, and save a wide calm back for the brooch finding.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Roll the eye colors to matched thickness and cut the full outer eye shape first so the plaque proportions stay balanced.
Build the yellow, pink, white, and blue rings as separate stepped inserts, checking the centerline as you place each one.
Keep the stack low and even so the eye reads flat from the side and still leaves enough back area for the pin.
Bake the plaque flat on a tile, let it cool completely, then attach the brooch back after cure instead of embedding it into the raw slab.
Leave the surface satin or add only a light gloss if you want more shine without losing the crisp ring read.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
This core kit covers the repeatable clay, tools, and hardware for this build family.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Covers the outer and inner yellow eye bands.
Matches the broad pink lower band and the upper pink detail strip.
Needed for the sclera rings around the pupil.
Useful for the plus-shaped pupil at the center of the eye.
Helps you roll the full eye stack to even thickness before cutting.
Keeps the eye rings even so the plaque stays flat and balanced.
Useful for trimming the stepped oval eye outline and the inner pupil cleanly.
Keeps the broad flat eye plaque from lifting during cure.
Gives the plaque a simple post-bake attachment path that matches the collar-pin read in the lifestyle image.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Graphic lips, eyes, mushrooms, and badge-like brooches are often easier to build as flat or gently domed pixel slabs. This guide covers crisp staircase edges, stacked layers, and ways to keep left and right pieces matched.
A brooch front can look strong and still hang poorly if the back is crooked, under-sized, or glued to a curved surface. This guide explains flat backs, balance, and more reliable attachment options to test for polymer clay pins.
Conditioning is not just softening clay. It is how you get cleaner slabs, steadier cane reduction, and sharper cut edges before the piece ever reaches the oven.
Explore adjacent builds with similar form, finish, or construction ideas.
Start with the cutter setup, thickness control, and clay that behave predictably. Clean edges come from the tooling and clay behavior, not just the shape.
See all guides
Start with a sharp stainless cutter set in circles, arches, or ovals. Clean release and repeatable slab thickness matter more than having dozens of shapes on day one.
A practical first order can stay focused: clay, a tile, an acrylic roller, a tissue blade, and an oven thermometer.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.
