Maker reference only. Verify brand instructions, seller details, dimensions, and safety guidance for your own setup.
Start with a white body and a separate pink cap, because the image pair reads like a clean toy-like mushroom sculpt with large round spots rather than a textured or pixel build. Keep the underside broad, add the yellow circles after the cap curve is set, and use small round cutters if you want the spots to stay even.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Shape a rounded white body with a flat underside before you attach the cap or tiny side details.
Form the pink cap separately and place it so the overhang looks balanced from the front.
Cut or press the yellow circles into the cap once the dome shape is set and the cap is seated cleanly.
Add the eyes, face, and tiny side bumps after the main form already stands without leaning.
Bake on a tile, using light support under the cap only if the overhang looks soft.
Leave the finish mostly as-baked or use a thin gloss only if you want a brighter candy-like cap.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
This core kit covers the repeatable clay, tools, and hardware for this build family.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Matches the bright pink mushroom cap in the reference figure.
Useful for the large cap spots and the small yellow face.
Needed for the body and to keep the underside bright and clean.
Makes the cap spots cleaner and more even than freehand circles.
Useful for smoothing the cap and body without flattening the tiny face.
Keeps the figurine base flat and stable during bake.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Small figurines look simple until the base wobbles, the cap droops, or the face gets smudged while you are still shaping the body. This guide covers the order of operations that keeps polymer clay characters stable and readable.
Flat tiles, bowl forms, fiberfill, foil, and armatures all solve different support problems. This guide explains how to think about stability, projection, and even thickness instead of chasing one fake universal max size.
Explore adjacent builds with similar form, finish, or construction ideas.
Start with the clay and bake control that make polished, buffed, or sealed finishes more predictable before adding surface extras.
See all guides
Start with Premo when you want one clay line for mixed beginner slabs, simple earrings, and general practice. Choose Soufflé when a lightweight matte finish is the priority, and consider Fimo Soft when a softer conditioning feel matters most.
Start with a simple analog dial thermometer. It is enough to compare your clay line's target temperature with the real heat at the shelf where you bake.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.
