Use this reference planas a maker reference, not a final spec. Some pages are researched and drafted with AI assistance, then reviewed by our team. Clay lines, ovens, tools, adhesives, and finishing products behave differently, so check your clay brand's instructions plus manufacturer safety guidance before baking, finishing, or attaching hardware.
Start with flat popsicle slabs and build the pink-to-cream gradient sheet before you cut the bite mark, because the images show a broad ombre face with sprinkles on top rather than a fully rounded sculpted treat. Once the gradient bodies match, add the sprinkle dots, insert the stick, and keep the gold stud connection centered above the bar.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Condition the pink and white clay to the same softness and build one Skinner blend sheet before you cut any shapes.
Cut both popsicle bars from that finished gradient sheet so the pair keeps the same pink-to-cream fade.
Trim the bite mark from the top edge, then place the tiny sprinkle pieces only after the main bar shape is already set.
Insert the mini stick at the base and pierce the top hanging point before baking so the upper edge stays centered.
Bake the popsicles flat on a tile, cool them fully, and add gloss only after the surface is clean and dust-free.
Attach the gold stud tops and short rings after cure so the bars hang straight without stressing the bitten top edge.
Metal findings like posts, hooks, and jump rings may contain nickel or other allergens. If you have sensitive skin, choose surgical steel or titanium findings and test any sealant or coating on a small area before wearing.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
Matches the upper half of the ombre face.
Needed for the pale lower half of the blend and for softening the pink fade.
Makes the Skinner blend smoother and more repeatable for matching popsicle bars.
Useful for trimming the bar shape and the bite notch without dragging the blend.
Needed for the visible stick at the base of each earring.
Matches the gold stud tops visible in the worn image.
Lets you connect the popsicle bars to the stud tops after cure.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. That support helps keep our guides and research free. As an Amazon Associate I earn from qualifying purchases. We choose products we think are relevant to the build, but check the listing details, dimensions, and material fit for your own setup before you buy.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Use Skinner blends when the color transition is the design feature. This guide covers conditioning, blend setup, when to cut the final shape, and how to keep popsicles, arches, and other flat pieces from turning muddy.
If an inspiration piece looks like it was built from placed petals, dots, lips, stars, or tiny cut motifs, this is usually the technique family you need. Learn when to applique, when to press pieces flush, and how to keep flat builds crisp instead of lumpy.
Many polymer clay drop earrings fail at the top: the stud sits too far back, the ring run is too long, or the drop twists sideways. This guide covers when to use visible stud toppers, when a flat pad is enough, and how to keep connector rings short and balanced.
Explore adjacent builds with similar form, finish, or construction ideas.
White Pixel Eyeball Earrings
White Pixel Eyeball Tile Earrings
Hot Pink and Yellow Textured Arch Hoop Earrings
Yellow Pixel Crown Earrings
Start with posts, glue, and cutters before you obsess over the silhouette. Those three decisions drive clean assembly and fewer failures.
See all guides
GlueMany makers reach for a two-part epoxy when they want slower setup time for post placement. Treat every adhesive as a test-first choice, especially if the clay, finding, finish, or prep routine changes.
PostsUse flat-pad posts with clear material specs when you want a common, easy-to-source assembly starting point. If you add titanium, verify the listing details and material spec before you position it as a separate hardware option.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.