Use this reference planas a maker reference, not a final spec. Some pages are researched and drafted with AI assistance, then reviewed by our team. Clay lines, ovens, tools, adhesives, and finishing products behave differently, so check your clay brand's instructions plus manufacturer safety guidance before baking, finishing, or attaching hardware.
Start with one hot-pink outer arch and a separate yellow inner arch insert, because the image pair shows a flat nested arch with a pebbled matte surface and direct gold huggie attachment rather than a fern print or a sculpted rainbow charm. Decide first whether you want to texture both colors or only the outer arch, then keep the wall thickness and the top hole position matched before you bake.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Roll the pink and yellow clay to the same thickness so the nested arches sit together cleanly once assembled.
Cut the outer pink arches first, then remove the inner opening and size the yellow inner arches to match that opening before you texture anything.
Press the fine front texture lightly so you keep the edges and wall widths crisp instead of crushing the arch shape.
Pierce or mark the top connection holes before baking and keep them centered so the gold huggies lift the arches straight.
Bake the arches flat on a white tile, cool them fully, and touch only the outer edge if any texture lifted near the rim.
Attach the gold huggies after cure and leave the finish matte instead of covering the texture in heavy glaze.
Metal findings like posts, hooks, and jump rings may contain nickel or other allergens. If you have sensitive skin, choose surgical steel or titanium findings and test any sealant or coating on a small area before wearing.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
Matches the full outer arch color.
Useful for the smaller inner arch layer.
Makes it much easier to repeat the outer and inner arch shapes cleanly.
Helps you roll the pink and yellow slabs evenly before cutting the pair.
Keeps the wall thickness even so both arches stay matched.
Matches the direct hoop connection shown in the images.
A flat tile helps the cutout arch plaques cure without twisting.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. That support helps keep our guides and research free. As an Amazon Associate I earn from qualifying purchases. We choose products we think are relevant to the build, but check the listing details, dimensions, and material fit for your own setup before you buy.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Open-center arches only look clean when the wall thickness, inner cut, and hardware choice all agree. This guide covers the build order that helps keep cutout drops lighter-looking, better balanced, and more consistently matched.
Choose polymer clay earring findings by front view, rear contact area, disclosed metal details, attachment method, and finished weight instead of treating one post, glue, or metal as universal.
A stainless cutter starter set in repeatable shapes is usually easier to learn with than a large novelty bundle. Clean release and even slab thickness matter more than a long shape list.
Explore adjacent builds with similar form, finish, or construction ideas.
Yellow Pink Blue Mod Link Dangles
Pink Ombre Sprinkle Popsicle Earrings
Cream Terrazzo Mini Arch Huggies
Pink Pixel Coffee Mug Studs
Start with posts, glue, and cutters before you obsess over the silhouette. Those three decisions drive clean assembly and fewer failures.
See all guides
PostsUse flat-pad posts with clear material specs when you want a common, easy-to-source assembly starting point. If you add titanium, verify the listing details and material spec before you position it as a separate hardware option.
GlueMany makers reach for a two-part epoxy when they want slower setup time for post placement. Treat every adhesive as a test-first choice, especially if the clay, finding, finish, or prep routine changes.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.