Use this reference planas a maker reference, not a final spec. Some pages are researched and drafted with AI assistance, then reviewed by our team. Clay lines, ovens, tools, adhesives, and finishing products behave differently, so check your clay brand's instructions plus manufacturer safety guidance before baking, finishing, or attaching hardware.
Start with one yellow lip silhouette and cut it twice from the same template, because the pair depends on the crisp yellow staircase border more than on rounded sculpting. Layer the hot-pink mouth on top, add the tiny black mouth details and pale highlight, then pierce the top tab before baking so the silver connector rings hang on the centerline.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Roll an even yellow sheet and cut both lip bases from the same template so the pair stays mirrored.
Roll a thinner hot-pink sheet and cut the lip fronts to leave the yellow staircase border visible all around.
Add the tiny black mouth blocks and mix a pale highlight from white and pink for the small upper patch.
Pierce the top tab before baking so the silver connector rings will sit on the true centerline of each lip.
Bake the pair flat on a tile, cool them fully, and clear the holes only if they tighten during cure.
Add the silver stud tops and jump rings after cure, then keep the finish satin instead of flooding the surface with gloss.
Metal findings like posts, hooks, and jump rings may contain nickel or other allergens. If you have sensitive skin, choose surgical steel or titanium findings and test any sealant or coating on a small area before wearing.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
Matches the main lip layer that dominates the face of each earring.
Useful for the visible staircase border around the lips.
Needed for the mouth slit and small top notch that make the lips read clearly.
Useful for mixing the pale highlight patch without muddying the pink.
Helps you roll matching yellow bases before layering the lip fronts.
Keeps the pair even so the two lips hang at the same height and angle.
Best for keeping the lip corners and the center slit crisp.
Matches the silver stud tops visible in the product and lifestyle pair.
Lets you build the short connector run above the lips after baking.
Useful for piercing the hanging point before baking so the connector sits on the true centerline.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. That support helps keep our guides and research free. As an Amazon Associate I earn from qualifying purchases. We choose products we think are relevant to the build, but check the listing details, dimensions, and material fit for your own setup before you buy.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Graphic lips, eyes, mushrooms, and badge-like brooches are often easier to build as flat or gently domed pixel slabs. This guide covers crisp staircase edges, stacked layers, and ways to keep left and right pieces matched.
Many polymer clay drop earrings fail at the top: the stud sits too far back, the ring run is too long, or the drop twists sideways. This guide covers when to use visible stud toppers, when a flat pad is enough, and how to keep connector rings short and balanced.
Conditioning is not just softening clay. It is how you get cleaner slabs, steadier cane reduction, and sharper cut edges before the piece ever reaches the oven.
Explore adjacent builds with similar form, finish, or construction ideas.
Hot Pink Pixel Heart Earrings
Hot Pink Pixel Butterfly Earrings
Yellow Pixel Cat Face Earrings
Hot Pink Pixel Flower Earrings
Start with posts, glue, and cutters before you obsess over the silhouette. Those three decisions drive clean assembly and fewer failures.
See all guides
GlueMany makers reach for a two-part epoxy when they want slower setup time for post placement. Treat every adhesive as a test-first choice, especially if the clay, finding, finish, or prep routine changes.
PostsUse flat-pad posts with clear material specs when you want a common, easy-to-source assembly starting point. If you add titanium, verify the listing details and material spec before you position it as a separate hardware option.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.