Maker reference only. Verify brand instructions, seller details, dimensions, and safety guidance for your own setup.
Start with a flat yellow square tile and pierce the centered top hole before bake, because both images agree on the layered pixel tile and hanging point even though one styles it on a silver ball-top drop and the other on a gold chain.
A quick read on the clay method, surface finish, and effort level before you start gathering tools.
Dimensions, motif spacing, and step timing below are build-ready estimates inferred from the reference image and the listed technique. Verify measurements against your own setup before cutting or assembling.
Work in sequence so the form, thickness, surface detail, and finishing stay controlled from prep through bake.
Roll an even yellow sheet and cut one square tile with clean stepped corners.
Roll a thinner hot-pink sheet and cut the four corner blocks plus the small center square.
Place the pink pieces on the yellow base and press them only enough to bond so the edges stay sharp.
Pierce the centered top hole before baking so a jump ring can later connect the tile to a chain or a short drop assembly.
Bake the tile flat on a ceramic tile and cool it fully before you test the hardware setup.
Add a light gloss only if you want to match the brighter reflective surface from the images.
Metal findings like posts, hooks, and jump rings may contain nickel or other allergens. If you have sensitive skin, choose surgical steel or titanium findings and test any sealant or coating on a small area before wearing.
Start with the core build kit, then add optional finishing or hardware only if it fits the version you want to make.
This core kit covers the repeatable clay, tools, and hardware for this build family.
Some links in this build guide are affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Matches the acid-yellow tile base that carries the whole pendant read.
Useful for the raised corner blocks and center square that give the tile its pixel pattern.
Helps you roll the base tile evenly before you add the smaller stepped pieces.
Useful for keeping the yellow base and pink top pieces at repeatable slab thicknesses.
Makes it easier to keep the stepped corners sharp instead of rounded.
Useful if you decide to pierce a top hanging point in the raw tile before baking.
Matches the necklace styling in the lifestyle image if you choose a pendant finish.
Read the technique guides that matter most for building this piece, refining the finish, or avoiding the most common mistakes.
Graphic lips, eyes, mushrooms, and badge-like brooches are often easier to build as flat or gently domed pixel slabs. This guide covers crisp staircase edges, stacked layers, and ways to keep left and right pieces matched.
Conditioning is not just softening clay. It is how you get cleaner slabs, steadier cane reduction, and sharper cut edges before the piece ever reaches the oven.
Explore adjacent builds with similar form, finish, or construction ideas.
Start with the cutter setup, thickness control, and clay that behave predictably. Clean edges come from the tooling and clay behavior, not just the shape.
See all guides
Start with a sharp stainless cutter set in circles, arches, or ovals. Clean release and repeatable slab thickness matter more than having dozens of shapes on day one.
A practical first order can stay focused: clay, a tile, an acrylic roller, a tissue blade, and an oven thermometer.
Keep this build handy while you test your own version.
Tag #ClayBakeStudio on Instagram or TikTok.
